Ram Computer Not

CM3+/32GB Raspberry Pi Compute Module 3+ with 32GB eMMC Flash 1GB RAM

CM3+/32GB Raspberry Pi Compute Module 3+ with 32GB eMMC Flash 1GB RAM
CM3+/32GB Raspberry Pi Compute Module 3+ with 32GB eMMC Flash 1GB RAM
CM3+/32GB Raspberry Pi Compute Module 3+ with 32GB eMMC Flash 1GB RAM
CM3+/32GB Raspberry Pi Compute Module 3+ with 32GB eMMC Flash 1GB RAM
CM3+/32GB Raspberry Pi Compute Module 3+ with 32GB eMMC Flash 1GB RAM
CM3+/32GB Raspberry Pi Compute Module 3+ with 32GB eMMC Flash 1GB RAM
CM3+/32GB Raspberry Pi Compute Module 3+ with 32GB eMMC Flash 1GB RAM
CM3+/32GB Raspberry Pi Compute Module 3+ with 32GB eMMC Flash 1GB RAM

CM3+/32GB Raspberry Pi Compute Module 3+ with 32GB eMMC Flash 1GB RAM

Compute Module 3+/32GB (CM3+/32GB), Raspberry Pi 3 Model B+ in a flexible form factor, with 32GB eMMC Flash. The CM3+/32GB Compute Module contains the guts of a Raspberry Pi 3 Model B+ (the BCM2837 processor and 1GB RAM) as well as an 32GB eMMC Flash device (which is the equivalent of the SD card in the Pi). This is all integrated onto a small (67.6mm × 31mm) board that fits into a standard DDR2 SODIMM connector.

The Flash memory is connected directly to the processor on the board, but the remaining processor interfaces are available to the user via the connector pins. You get the full flexibility of the BCM2837 SoC (which means that many more GPIOs and interfaces are available than with a standard Raspberry Pi), and designing the Module into a custom system should be relatively straightforward because the Pi Foundation has put all the tricky bits onto the Module itself.

CM3+/Lite: None, but brings the SD card interface to the Module pins so a user can wire this up to an eMMC or SD card. 200PIN SODIMM connector (35U hard gold plating I/O pins). (1x SD has been used for eMMC Flash on non-Lite variants).

1 x HDMI 1.3a. 1 x DPI (parallel RGB display). 1 x 4-lane CSI Camera Interface (up to 1Gbps per lane).

1 x 2-lane CSI Camera Interface (up to 1Gbps per lane). 1 x 4-lane DSI Display Interface (up to 1Gbps per lane). 1 x 2-lane DSI Display Interface (up to 1Gbps per lane).

Compared to CM1, the CM3+ supports more OS, like Windows 10 (the free IOT-specific version from Microsoft). Compute Module 3+ 32GB x1. If you want to pay by other way, please contact with us directly.

· Your shopping experience is very important to us and our business. · Any question, you are always welcome to contact with us directly, we will reply you asap.

The item "CM3+/32GB Raspberry Pi Compute Module 3+ with 32GB eMMC Flash 1GB RAM" is in sale since Thursday, July 18, 2019. This item is in the category "Business & Industrial\Electrical Equipment & Supplies\Electronic Components & Semiconductors\Semiconductors & Actives\Development Kits & Boards". The seller is "devkits" and is located in . This item can be shipped worldwide.

  • MPN: Does Not Apply
  • Brand: Raspberry Pi


CM3+/32GB Raspberry Pi Compute Module 3+ with 32GB eMMC Flash 1GB RAM